The 3D metrology market is projected to grow at a CAGR of 6.92% from US$11.73 billion in 2025 to US$16.34 billion in 2030.
3D metrology device is used for inspection and observation purposes in an industry set up for efficient operation and production. The prime reason which is driving lucrative growth in the market is robust advancement being observed across end-user industries. Automotive, and aerospace and defense enterprises are key users of 3D metrology technology. These industries are witnessing notable growth which is expected to drive demand for 3D metrology services throughout the forecast period. Moreover, the growth is observed in the electric vehicle industry in addition to growing environmental consciousness is projected to open new opportunities. With the strict labor laws that ensure a safe working environment, the adoption of advanced safety equipment for hazard avoidance and lower risk at work has bound the industries to adopt protective devices, which is expected to boost the market growth. Furthermore, increasing innovation and R&D in the industry has resulted in notable development in the technology which is further augmenting the demand for these services. While the North American region is expected to hold a dominating market share, the Asia Pacific 3D metrology market is projected to grow at the fastest rate.
One of the prime reasons supporting the growth in the 3D metrology market is increasing cases of industry hazards and mishappening which has put life and capital at significant risk. Data published by Eurostat show that fatal accidents in an industry setup were recorded at 3,500 cases in the EU27 in 2023, increasing the death toll by 70 people in comparison to the previous year. Of these, 1/5th took place in the construction industry. Furthermore, approx. 9,000 industry accident incidents occurred in India from 2019 to 2023, 4,800 of which accrued while operating machinery and 600 were mining disasters. Rising fatal and severe industry accidents have increased concerns and encouraged authorities to implement strict labor and industry laws. These laws encourage the adoption of safety equipment and device, supporting the demand for 3D metrology technology.
Geographically, the 3D metrology market has been classified into North America, South America, Europe, Middle East, and Africa, and the Asia Pacific. North America holds a significant market share owing to the aging grid infrastructure and rigorous government laws requiring the use of sustainable power technologies while the Asia Pacific is projected to grow at a rapid pace during the forecast period. The North American 3D metrology market has been segmented into the United States, Canada, and Mexico. The U.S. holds the major market share in the North America 3D metrology market owing to the introduction of new labor laws concentrated towards labor protection and safety. Furthermore, empowering regulations under NAFTA 2018 is expected to increase the market adoption of 3D metrology technology. Canada’s 3D metrology market will witness a decent CAGR during the forecast period owing to the strict government regulation in the country.
The global 3D metrology market report provides a comprehensive analysis of the industry, offering strategic and executive-level insights backed by data-driven forecasts and trends. Regularly updated, this report empowers decision-makers with actionable intelligence on market dynamics, emerging opportunities, and competitive landscapes. It explores demand across various 3D metrology components, product and industry vertical, while detailing their adoption across key regions. The report also highlights technological advancements, government policies, regulations, and macroeconomic factors shaping the market.
3D Metrology Market Segmentation by solution component:
The 3D metrology market is segmented by solution component into the following:
3D Metrology Market Segmentation by product:
The 3D metrology market is analyzed by product into the following:
3D Metrology Market Segmentation by industry vertical:
The 3D metrology market is segmented by industry vertical into the following:
3D Metrology Market Segmentation by regions:
The study also analysed the 3D metrology market into the following regions, with country level forecasts and analysis as below:
The global 3D metrology market is marked by the presence of key players such as Hexagon AB, FARO Technologies, Inc., Nikon Corporation, Carl Zeiss AG, KLA Corporation, Keyence Corporation, Renishaw plc, Mitutoyo Corporation, 3D Systems, Inc., Creaform, and Perceptron, Inc..
This report provides extensive coverage as explained in the points below:
How this report is helpful to you and reasons for purchase?
| Report Metric | Details |
|---|---|
| Study Period | 2021 to 2031 |
| Historical Data | 2021 to 2024 |
| Base Year | 2025 |
| Forecast Period | 2026 – 2031 |
| Report Metric | Details |
| 3D Metrology Market Size in 2025 | US$11.73 billion |
| 3D Metrology Market Size in 2030 | US$16.34 billion |
| Growth Rate | CAGR of 6.92% |
| Study Period | 2020 to 2030 |
| Historical Data | 2020 to 2023 |
| Base Year | 2024 |
| Forecast Period | 2025 – 2030 |
| Forecast Unit (Value) | USD Billion |
| Segmentation |
|
| Geographical Segmentation | Americas, Europe, Middle East and Africa, Asia Pacific |
| List of Major Companies in the 3D Metrology Market |
|
| Customization Scope | Free report customization with purchase |